Suction Hoses

Xerostar Holdings can supply the following sizes - measured as the internal diameter in millimetres. 

19mm Chairside Hose - for use as a chairside suction hose - normally supplied with the XeroStar system in lengths of 1.5 Metres.  This hose can be used with all suction tip holders provided that 
you use a small adapter sleeve. This hose is wider than commonly used, however we have found that our staff didn't have any trouble adapting to the new size. The extra diameter of this hose improves air flow and suction power.
Only available in black

25mm Main Hose - this hose is used to connect the chairside filter to the separator - available in any length, but usually supplied in 4.5 Metre lengths with the XeroStar system. 
Plain joiners can supplied.
Only available in black - (white may be available later depending on demand )

Other sizes such as 10mm 15mm 32mm & 38mm may be available on request..

The Price 
 See the price list for exact details.

To prevent cross contamination we recommend the use of plastic wrap near the suction tip.
Dealer enquiries welcome - email us now!