XEROSTAR
DENTAL EQUIPMENT
Medium
Separator
Note:
the vacuum motor connection
at
the top, the main suction inlet middle
right,
and the p-trap waste connection
on
the lower left.
This
XeroStar Separator is suitable
for
installation in a surgery cupboard or in a utility room.
It
can be used to service from
one
to 5 operatories
It's
total height is 450mm.
The
New Medium Separator with Amalgam Trap
The
total height of this unit is 760mm
 
separator
complete
with
amalgam trap
|
separator
unit
|
  
amalgam
trap: after
removing
separator unit
|
with
the sealing caps
|
with
sealing caps in place
|
The
amalgam trap holds 5 Litres of water and is capable of holding the same
volume of amalgam sediment.
The
amalgam traps are supplied as two exchangeable units.
When
the first amalgam trap is full, sealing caps are fitted.
The
amalgam trap can then be safely transported for recycling of the amalgam.
The housing is made from a robust grade of PVC.
The
screw-on caps have leak-proof rubber O rings.
We
recommend that the separator be inspected and cleaned before reassembly.
The
separator unit is screwed onto the spare amalgam trap.
The
complete separator unit is then ready for further service.
An
empty replacement amalgam trap is supplied when the full amalgam trap is
collected for recycling.
REMEMBER THERE IS ONLY ONE MOVING PART !
THEREFORE ALL XEROSTAR SEPARATORS ARE ULTRA - RELIABLE !
Back
to Equipment Page
|
